CALCULATION OF THE DEFLECTION OF A PINCHED ROUND PLATE
Rubrics: MECHANICAL ENGINEERING
Authors:
Type:
Article
Pages:
from 209
to 210
Status:
Published
Received:
12.05.2021
Accepted:
10.01.2022
Published:
10.01.2022
Subject area:
GRNTI 55.01 Общие вопросы машиностроения
Language:
Russian
Keywords:
accompanying function, pinching, deflections, deflection coefficient, plate
Abstract (English):
A method for calculating the deflection of a round flat steel plate pinched along the edge, bearing an axisymmetric load, is considered. For practical calculations, dimensionless coefficients of deflection in the center and in the area of fixing a round flat plate pinched along the edge are applied, the stress coefficient and the accompanying function, which depends on the deflection of the plate and the pressure force on it, are taken into account
A method for calculating the deflection of a round flat steel plate pinched along the edge, bearing an axisymmetric load, is considered. For practical calculations, dimensionless coefficients of deflection in the center and in the area of fixing a round flat plate pinched along the edge are applied, the stress coefficient and the accompanying function, which depends on the deflection of the plate and the pressure force on it, are taken into account
Keywords:
accompanying function, pinching, deflections, deflection coefficient, plate
accompanying function, pinching, deflections, deflection coefficient, plate
1. Chizhevskiy K. G. Raschet kruglyh i kol'cevyh plastin. Spravochnoe posobie. L., «Mashinostroenie» (Leningr.otdelenie), 1977. -1
