FEATURES OF CALCULATION OF VIBRATIONS OF A PINCHED ROUND PLATE
Rubrics: MECHANICAL ENGINEERING
Authors:
Type:
Article
Pages:
from 207
to 208
Status:
Published
Received:
12.05.2021
Accepted:
10.01.2022
Published:
10.01.2022
Subject area:
GRNTI 55.01 Общие вопросы машиностроения
Language:
Russian
Keywords:
A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fundamental tone (the lowest type of vibration), is considered. For practical calculations, the influence of the mass of the plate itself, as well as the mass of air or liquid, on the frequency of natural oscillations is taken into account.
Abstract (English):
A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fundamental tone (the lowest type of vibration), is considered. For practical calculations, the influence of the mass of the plate itself, as well as the mass of air or liquid, on the frequency of natural oscillations is taken into account.
A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fundamental tone (the lowest type of vibration), is considered. For practical calculations, the influence of the mass of the plate itself, as well as the mass of air or liquid, on the frequency of natural oscillations is taken into account.
Keywords:
A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fundamental tone (the lowest type of vibration), is considered. For practical calculations, the influence of the mass of the plate itself, as well as the mass of air or liquid, on the frequency of natural oscillations is taken into account.
A method for calculating the vibrations of a circular steel plate, clamped around the circumference and loaded with a short-term load, with the determination of the frequency of the fundamental tone (the lowest type of vibration), is considered. For practical calculations, the influence of the mass of the plate itself, as well as the mass of air or liquid, on the frequency of natural oscillations is taken into account.
1. Chizhevskiy K.G. Raschet kruglyh i kol'cevyh plastin. Spravochnoe posobie. L., «Mashinostroenie» (Leningr. otdelenie), 1977. -184 s.
2. Timoshenko S.P. Kolebaniya v inzhenernom dele. M., «Nauka», 1967, 444 s.
